First
The AGIR wing comes in six different sizes.

For single cylinder diving we have one model in two sizes, Blackbird with 28 lbs and 36 lbs lift capacity respectively. Both Blackbirds are circular (360º style).
For double cylinder diving we have two models in four different sizes.

One model is horseshoe style, habrok 38 lbs and habrok 55 lbs.

The other, 360º style, is niord 40 lbs and niord 44 lbs.

They are made out of rugged nylon-coated cordura which is
a very strong material and easy to keep clean.
The design and cut reflect our diving philosophy in being simple, hardwearing and with the best of in-water performance. Our wing-pattern is carefully adjusted to enhance built-in balance for effortless diving and trim. Also every detail on all five models is scrutinized to give you high comfort. AGIR wings are the first wings designed specifically for European (e.g. Faber and Eurocyl.) double cylinders.

Details

Seams
To strengthen the outer shell, the pattern pieces are sewn together and then folded and sewn again to prevent tearing.

OPRV
The over pressure relief valve position is chosen to release gas effectively and be easy to pull-dump. We use a 3mm dinghy-line, 130mm/5 inches long with just two knots for good grip and no snag.

Drainage
For drainage two eyelets are placed on each bottom/side of the wing. They are 15mm/0,5 inch in diameter and made of coated brass.

Trimming
The design makes perfect room for the backplate.
The backplate will rest on three layers of cordura with its contours
outlined with a double seam on the wing. This way the wing
is protected from being squeezed and possibly damaged.
AGIR wings are furnished with optional holes for optimum trim.

OPRV

The over pressure relief valve position is chosen

to release gas effectively and be easy to pull-dump.

We use a 3mm dinghy-line, 130mm/5 inches long

with just the two knots for good grip and no snag.